How to build a home theater
You want to learn some ways you can decorate your home theater. In this article, we will tell you everything about how you can start building a home theater. Below are all the tips that will enable you to do so.
Things you will need to know for building a home theater
1. Controlling your ambient sound
Ambient sound is the sound that is unwanted, and it comes from the outside of your home theater room. If you manage to find some dedicated space for the home theater, sounds that will enter from the outside will affect your movie-watching experience. Thus, for building a home theater, you have to eliminate all of the ambient sounds that come from plumbing noises, dryers, cloth washers, and sounds from outside your home.
When selecting a space for your home theater, your first step must be to control these noises. For this, you will need to soundproof your home theater room. You can replace your drywall with a sound-reducing wallboard and add a second drywall layer. Additionally, you can even replace the hollow core doors with some solid doors. Putting up thicker curtains will help absorb the sound and block the light. You can also seal the cracks in your walls with some caulk.
2. A flexible lighting system
Controlling light in a movie theater room will involve the ability to switch on and off the lights and add that light to the movie space. Recessed lights, soffits, dimmers, and rope lights are the backbone of several owner-built movie theater rooms at home. Soffits are the long trays around the ceiling that can run around the perimeter of a room and are inlaid with some rope lights.
One can add small recessed lights below the soffits or on the ceiling for shining downward to create a classic look for your home theater. You can keep all these lights behind the back of the viewer to allow a smooth viewing experience.
3. Setting up sound and video system
Once the painting of your drywall is done, you can hang the screen, projector, and speakers. If your home theater is twenty by thirteen feet, the suitable screen size must be one hundred ten to one hundred twenty inches. To get a professional feel, you can frame the screen with the help of a proscenium- some black acoustic panels that will hide the center, left, and right speakers.
Camouflaging the rest of the speakers with some acoustic panels will help doubling as an artwork. You can print these panels with custom designs, including favorite posters of movies and family photos. The projector and the speaker will connect with the receiver in the equipment hub.
With a good Bluray player, you can play more than discs. You can also see some high-definition movies in your home theater room from the Internet. Some Blu Ray players are also compatible with PCs, making them suitable for watching videos, music, and photos in your home theater.
4. Pre-wiring the lights
Good lighting is an integral part of forming a movie theater-like atmosphere. For this, you required sconces along your side walls beside recessed lighting on the ceiling. You can run basic electric wires to each one of these locations. And if you connect the lights with an RF dimmer, you can control them with a similar RF remote you use for your projector. You can even set the lights for auto-dimming every time you play a movie or a video.
If you want a more elaborate movie-watching experience similar to a stadium, you must add floor lighting to the steps. You can also pre-wire the low-voltage lighting that you can keep switched on at all times.
5. Layout and screen distance
When you measure the space, you have to keep two things in mind, will the room be multi-functional, or do you want it as a specially designated theater room? You will need a room of 10′ to 12′ size, in case you prefer a large visual display such as a screen or a projector setup. There are some short-throw projectors that may be able to stretch in those dimensions. But if the DIY movie theater room is less than the size above, you can think of other audiovisual or theater setup ideas. Normally, flatscreen TVs look better for small-scale rooms, and projectors look good for large-scale rooms.
6. Figure out the electronics
It is essential to first figure out the electricals before setting up your home theater room; for instance, the layout for the furniture of your home theater must be thought of well around the electrical work of your home. You can plan where it will be convenient to keep your outlets and how you can hide cords and wires and how you can protect expensive equipment in the media room, such as the seats of the tech theater. This will help you to sort out the electricity in your home theater room.
Final words
To start building a home theater room, you can start by controlling your ambient sound so that it does not interfere with the sound of your movie theater room. For this, it is important that you soundproof your room. In addition, setting good lighting is also important to set the tone of your movie theater room. If you want a grand movie-watching experience like you do in a theater outside, you can go with adding lighting to the steps of your home theater room.
Pre-wiring your lighting and selecting the size of lighting will be important while setting up your home theater room. If you have a large room, you can go for elaborate setups with projectors and screens. Hometheaterinstallationorangecounty.com is the best website where you can find professionals who can guide you and help you build your home theater room.
https://g.page/home-theater-installation-orange?share
https://maps.google.com/maps?cid=5583729198828384950